Filter
Top Products
www.kodak.com/go/aiosupport 71
KODAK ESP 3.2 / 3.2s All-in-One Printers
Copying a photo
You can copy a photo using the default settings, or you can adjust the quantity, size,
quality, and brightness of your copies.
Using the default settings to copy a photo
The default settings are either the factory default settings (see Resetting factory
defaults, page 100), or defaults that you have set on the printer (see the bottom
entry in the table under Adjusting the settings and copying a photo, page 72).
1. Load photo paper into the printer (see Loading photo paper, page 46).
2. Lift the scanner lid, and place the photo face down in the right-front corner of
the scanner glass.
3. Close the lid.
4. Press .
5. Touch Copy Photo.
6. Press .