Kodak 9200 All in One Printer User Manual


 
www.kodak.com/go/aiosupport 51
KODAK ESP 9200 Series All-in-One Printer
Scanning from the control panel
To scan a document or picture(s) from the control panel:
1. Load the original.
2. Press Scan.
The Scan Options menu appears on the LCD.
3. Press to select an option, then press or to change the setting.
Scan Option Settings Description
Scan To USB-connected
computer
(default)
The scanned file is sent to the
USB-connected computer.
Name of computer
(only if a computer is
connected by
wireless or Ethernet
network)
The scanned file is sent to the
computer on the wireless or Ethernet
network.
Memory Card The scanned file is sent to the
memory card in one of the memory
card slots.
USB Flash Drive The scanned file is sent to the flash
drive attached to the front USB port.
Scan What Document
(default)
Sets the scan settings for scanning a
document (
see Changing the scan
settings for scanning from the
control panel, page 47).
Photo
Sets the scan settings for scanning a
photograph (
see Changing the scan
settings for scanning from the
control panel, page 47).
Destination File
(default)
Sends the scanned file in the format
and to the location on your computer
that you designate (
see Changing the
scan settings for scanning from the
control panel, page 47).
Application Sends the scanned file to Home
Center Software.
Save as Defaults No / Yes To save the settings as the new
default, press
OK. With Ye s selected,
press
OK.