Kodak ESP2170 All in One Printer User Manual


 
Faxing
66 www.kodak.com/go/aiosupport
Disable Call Waiting No (default) / Yes If you have call-waiting service on your
phone line, you can disable it so that an
incoming call does not interrupt your fax
transmission.
Select Yes to disable call waiting, then
enter the call waiting disable code
(below).
Call Waiting Disable
Code
*70 (default) The printer automatically dials the call
waiting disable code before dialing the
number to which you are sending a fax.
This code disables call waiting for the
duration of the fax, preventing incoming
calls from interrupting your fax
transmission.
The usual code to disable call waiting is
the default *70. If the call waiting disable
code is different in your area, press
OK,
then press to erase the current code.
Use the keypad to enter the correct
code, then press
OK.
NOTE: You must enable call waiting
manually after your fax
transmission.
Distinctive Ring Any ring (default) /
Single Ring / Double
Ring / Triple Ring
This service, available from most phone
companies, adds multiple phone
numbers to one phone line. Each phone
number then has a distinctive ring
pattern (single, double, or triple ring) to
let you know which number is ringing.
Select the ring pattern assigned to the
phone number for the printer so the
printer can receive faxes automatically.
Fax Speed Fast - 33.6K (default)
Medium - 14.4K
Slow - 9.6K
Use this setting to reduce the fax
transmission speed of your printer if you
have difficulty with faxing at higher
speeds.
Fax Speaker On (default) / Off The fax speaker allows you to hear the
dial tone and initial fax tones when
sending faxes.
Print Fax
Confirmation Page
Never (default) /
Always / After Failure
Only
The Fax Confirmation Page contains the
time and date, the number you called,
the number you called from, and
whether the transmission was
successful.
Fax Option Settings Description