Kodak Kodak 10/100 Network Interface Card Printer User Manual


 
Kodak 10/100 NIC Introduction and Configuration
1-2 July 1998
I
N
T
R
O
D
U
C
T
I
O
N
It is also intended for administrators and experienced users responsible
for conÞguring individual workstation platforms.
This guide assumes an understanding of Novell IPX, EtherTalk, TCP/IP,
and/or NetBeui networking protocols, and administrative experience with
Novell, Macintosh, Windows and/or Unix platforms.
This guide provides procedures for installing the NIC hardware,
conÞguring the NIC, conÞguring print queues, and conÞguring user
workstations.
This guide does
not
describe how to operate a printer or proofer. For that
information, refer to the appropriate printer or proofer user guides.
1.3 Contents of this Guide
Chapter 1 - Introduction and ConÞguration Overview:
Provides
overviews of the Kodak 10/100 NIC used with Kodak Printers and
Proofers. Also provides an overview of NIC and printer installation and
conÞguration procedures.
Chapter 2 - NIC Hardware Installation:
Has instructions for installing the
Kodak 10/100 NIC hardware in Kodak printers and proofers. Also
provides initial powerup details for verifying proper installation.
Chapter 3 - Windows - FastManage Utilities:
Has instructions for
installing FastManage utilities for conÞguring the NIC from Windows
platforms. Also describes the use of the FastManage utilitiesÑ Discovery,
Kodak NIC Manager, BootP and Ping.
Chapter 4 - Novell Netware Server:
Has procedures for setting up
Novell Netware Bindery or NDS server print queues to accommodate
Kodak printers.
Chapter 5
- Windows for Workgroups (3.x)
Chapter 6
- Windows 95
Chapter 7
- Windows NT 3.51
Chapter 8
- Windows NT 4.0
Chapter 9
- Apple Macintosh