Filter
Top Products
Printing
July 1998 11-3
P
R
I
N
T
I
N
G
11.3 Changing From PostScript to Raster Printing Modes - Kodak
DCP 9000/9300 Proofers
1. If the Indicator next to the ON LINE key is lit, then Press ON LINE on
the display panel when READY appears in the panel to take the
proofer OFF LINE.
2. Press MENU and SETUP:EXIT will appear.
3. Press until SETUP:MODE appears.
4. Press ENTER to access the SETUP:MODE submenu.
5. Press until MODE:POSTSCRIPT or MODE:RASTER appears.
The currently selected version is indicated by an asterisk (*).
6. Press ENTER to make your choice.
7. Press until MODE:EXIT appears.
8. Press ENTER.
9. Press until SETUP:EXIT appears.
10.Press ENTER.
If you change the mode, wait for the printer to reinitialize and return to
READY.
ON LINE
TEST
CANCEL/
ENTER
MENU
RESET
”“
”“
”“
”“