Kodak Kodak 10/100 Network Interface Card Printer User Manual


 
Kodak 10/100 NIC Introduction and Configuration
1-8 July 1998
I
N
T
R
O
D
U
C
T
I
O
N
¥ Windows & Macintosh Printer ConÞguration Software: PostScript
drivers for Kodak printers for printing when the printer is in PostScript
mode and Export modules for printing when the printer is in raster
mode. For Unix platforms, refer to Appendix E, Technical Assistance.
¥ Printer/NIC documentation and software: If you cannot locate the
software that came with your printer and NIC, the latest printer and
NIC documentation and software are available on the Kodak Web site
(www.kodak.com). You may wish to copy components that are
pertinent to your printer and NIC to a local server for quick access by
those who are responsible for setting up their individual workstations.
Note: If you have problems related to printer or NIC software, check
the Kodak Web site (www.kodak.com) to verify that you have
the latest version. Download the latest version, if necessary.
Step 3: Install the NIC hardware, if necessary
¥ Install the NIC in the Kodak printer, if necessary. Refer to the NIC
Hardware Installation chapter for installation details and to verify
proper NIC operation on powerup.
Step 4: ConÞgure the NIC from the desired platform
¥ NIC Defaults: We recommend that you use the default parameters
initially until the printer functions on your network.
¥ NIC ConÞguration SW: If you decide not to use the defaults, install the
remote conÞguration software utilities appropriate for the platform.
Refer to the appropriate chapter for details.