Kodak Kodak 10/100 Network Interface Card Printer User Manual


 
Windows - FastManage Configuration Utilities
3-2 July 1998
F
A
S
T
M
A
N
A
G
E
3.1.1 FastManage Hardware Requirements
FastManage requires:
¥ A 486 Pentium PC, 66 Mhz computer or higher
¥ 16 MB of RAM or higher
¥ At least 4 MB of free disk space
¥ Microsoft Windows 3.1 or higher
¥ Ethernet card installed
FastManage runs as a stand-alone tool (that is, users need not have any
TCP/IP packages on their systems). However, if a system has any
Winsock compatible TCP/IP stacks (that is, PC/TCP, Chameleon, or LAN
Workplace), FastManage will co-exist with these packages. FastManage
runs on top of public domain packet drivers as well as ODI drivers.
3.1.2 Software Requirements
IP ConÞguration
¥ Packet or ODI Driver must be loaded for the PC network interface.
¥ For ODI Drivers, add the following line to the net.cfg Þle:
Frame Ethernet_II
IPX ConÞgurations
¥ Novell 4.1 Drivers for Windows and DOS. Refer to the Novell Netware
Documentation for information.
¥ ODI Driver must be loaded for the PCÕs network interface.
NetBIOS ConÞguration
¥ NetBIOS over NetBEUI network conÞguration for Windows 3.11 or
Windows 95.