Kodak Kodak 10/100 Network Interface Card Printer User Manual


 
Windows 95
July 1998 6-1
W
I
N
D
O
W
S
9
5
6 Windows 95
Refer to Kodak Printer/NIC Installation and ConÞguration Overview in
Chapter 1 for overall conÞguration process steps and details. The steps
described in this chapter are highlighted in the list below.
Step 1: Assess your network/printing environment
Step 2: Gather the necessary components
Step 3: Install the NIC Hardware, if needed
Step 4: ConÞgure the NIC, if necessary
Step 5: ConÞgure the print servers, if needed
Step 6: ConÞgure the printer on user workstations
Step 7: Printing
6.1 ConÞgure the NIC
If possible, start with the default parameters. TCP/IP protocol is the only
protocol that minimally requires conÞguration of an IP address. Refer to
FastManage, Chapter 3, or Telnet, Appendix A. If you need to conÞgure
NIC network parameters in Windows environments.
6.2 ConÞgure the Workstation for Printing
You should verify that this platform is supported for printing to your printer
or proofer. Refer to the user guides and README Þles provided with your
printer or proofer for information about installing software to support
PostScript and raster printing, calibration, etc. If needed, refer to
Appendix E, Technical Assistance.