Filter
Top Products
8-2
Cannot Send Messages
When a document cannot be sent, try to correct the problem by referring to the table below. If the
document still cannot be sent properly even after attempting to correct the problem, please con-
tact your service representative.
•
For detail about troubles of the Internet Fax, see p.4-2.
• Refer to "Error Message Displayed" (p. 8-4) for information regarding error messages.
• Refer to the “Instruction Manual (Copy Operations)” provided with the FK-102 Type-A for
problems such as jamming of originals, paper jams, poor image quality or running out of
toner.
Check Points Corrective Actions
Is the transmission procedure cor-
rect?
Check the transmission procedure and then try sending again.
Is the FAX number of the remote sta-
tion being called correct? Are Pro-
gram dialing or abbreviated dialing
numbers registered correctly?
Using Program dialing or abbreviated dialing, there may be an
error in registration of the FAX number. Try printing out the
Abbreviated Dialing List and check if the number is registered
correctly. Correct if there is an error in registration.
Is the telephone line setting correct?
Does [Dialing method] of [Line Parameters] in the Key Operator
mode match the telephone line being used? Check the setting
and correct if there is an error.
Is the telephone line connected prop-
erly?
Is the telephone line disconnected? Check the telephone line
connection and connect it if it is disconnected.
Is there a problem with the receiving
machine?
Is the power of the receiving facsimile turned off, is it out of
paper or is there another problem? Telephone the remote desti-
nation and check if there is a problem.
HINTS