Konica Minolta A034012 All in One Printer User Manual


 
Status, Error, and Service Messages8-34
Error Messages (Operator Call)
This
message...
means... do this...
AUTH
TIMEOUT
The user is automatically
logged off due to IEEE802.1x
port authorization.
Reauthorize the IEEE802.1x
port, and then log on.
AIDC
ERROR
AIDC sensor error. Open and close front cover
to automatically clean AIDC
parts.
BELT
ERROR
The printer detected incorrect
image position on the image
transfer belt.
Check the cyan and black
toner cartridges and replace
them if they have run out.
If the error has not been
recovered by this proce-
dure, please call Technical
Support.
DUPLEX
UNIT
PANEL
OPEN
Duplex cover is open. Close the duplex cover.
DOWNLOAD
IMAGE
INVALID
While updating code, an error
has occurred.
The user should attempt the
upgrade process again.
I/C LIFE
END
The imaging cartridge is
reached the end of its life.
Replace the imaging car-
tridge.
PAPER JAM
DUPLEX
Media has misfed in the
duplex option.
Locate and remove the mis-
feed.
PAPER JAM
EXIT
Media has misfed in the fuser
area.
PAPER JAM
FUSER
PAPER JAM
TRANSFER
Media has misfed in the trans-
fer roller area. This type of
misfeed means that the media
did not make it to the paper
exit area.
PAPER JAM
TRAY 2
Media has misfed while being
pulled from Tray 2.
Locate and remove the mis-
feed.