KTI Networks KSD-800 Switch User Manual


 
Specifications :
Industrial 8-Port Fast Ethernet Switches
with Fiber Connectivity
Benefits :
Fast Ethernet switch with 8 10/100Mbps copper ports and optional fiber ports
Wide operating temperature range for temperature critical environment
Support DIN rail mounting and panel mounting
Provide two power input types to meet more application needs
Accept wide power input voltage range for application flexibility
Industrial-rated Emission and Immunity performance
Key Features :
8 10/100M ports support auto-negotiation and auto-MDI/MDI-X configuration
Port 7 and Port 8 provide either copper or fiber connection (model dependent)
Provides wire speed store-and-forward switching
Supports IEEE 802.3x flow control for full-duplex operation
Supports Back-pressure flow control for half-duplex operation
Provides Far End Fault function on the fiber ports
Standard IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, 100Base-FX
Network Ports 8 RJ-45 10/100Mbps auto-negotiation, auto-MDI/MDI-X ports
2 100Mbps 100Base-FX ports (model depedent)
(Port 7 and Port 8 provide dual connectivities, either copper or fiber.)
Network Cables 10Base-T : Cat. 3, 4, 5 or higher up to 100m
100Base-TX : Cat. 5 or higher up to 100m
100Base-FX : MMF 50/125µm 60/125µm, SMF 9/125µm
MAC Addresses Table with 1K entries
LEDs Per unit : Power, Management
Per 10/100M port : Link/Activity, 100M, Duplex/Collision status
Per fiber port slot : Link/Activity status status
Relay Output Alarm : Power failure
Interface : 2 terminal contacts
Spec. : 30VDC/1A max. or 120VAC/0.5A max.
DC Power Input Screwed terminator block : 2 pairs of +/- contacts
DC jack : -D 6.3mm / + D 2.0mm
Operating voltage range : +7 - +30VDC
Power Consumption 7.3 watts (max.)
Housing Enclosed metal with no fan
Dimension 140 x 106 x 40 mm (WxDxH)
Mounting Support DIN Rail mounting, Panel mounting
KSD-800
Panel Mounting Bracket
080110