Filter
Top Products
Preparing for a Network Connection
Windows NT 4.0 Configuration 3 - 1
Preparing for a Network Connection
You can use your printer as a network printer with Windows NT 4.0 using the Multi Direct Print
application, and TCP/IP or NetBEUI protocols. This chapter explains how to configure your
printer and Windows NT.
Preparation: The Multi Direct Print Application supports the TCP/IP protocol and the NetBEUI
protocol. Consult with your network administrator before selecting the protocol.
Limitation: When you use the NetBEUI protocol, you cannot print to a printer which is located
on the other side of a router.
Note: You can use both TCP/IP and NetBEUI protocols in a computer. To use
both protocols you must first install them.
TCP/IP
NetBEUI
Windows 95/98
Basic Procedure
Selecting the protocol
TCP/IP NetBEUI
Assigning the IP address
Configuring Windows environment
Installing the Multi Direct Print
Installing the Printer Driver
Changing the port