Filter
Top Products
Message List
6 - 22 Additional Functions
Message List
System Log Information
You can use the following methods to view the system log.
mshell
Network Configuration Page: Configure PCL for the Printer Language, and push the switch
on the Network Interface Card for five seconds.
Message when Network Interface Card Starts or Restarts
This is a list of messages recorded to the printer's system log. The system log can be viewed
using the syslog command.
Item Name Description
LANIER Network Interface Card ver.x.x.x Version number of the NIC
PRINTER SYSTEM “System Name”
ver.x.x.x
System name and version of the printer
Attach FileServer=”file server name” Printer is attached to “file server name”
as the nearest server
Current Interface Speed:xxxMbps Speed of the network (10Mbps or 100
Mbps)
Current IPX address Current IPX address
FrameType=”frame type name” Frame type name is configured to be
used on NetWare.
NetBEUI Computer Name=”compter
name”
NetBEUI Computer Name is defined as
computer name.
Start httpd Web server has been started.
Start npmpd for IPX npmpd for IPX protocol has be started.
Start npmpd for TCP/IP npmpd for TCP/IP protocol has be
started.
Start smpd direct print mode (NetBEUI) You can print from a client on the
Windows network via the print server.
Start snmpd Ver 2.0 SNMP agent of the displayed version has
been started.
Vendor=, Country=, Lang= Vendor, country code, and language.