Filter
Top Products
Quick Start Guide
MODEL PPU916RS
Lenmar PowerPort Laptop Battery – The Ultimate Power On The Go
AC ADAPTER LABEL
DC RATING:16V
A
BOTTOM OF LAPTOP
DC RATING:16V
B
SIDE OF LAPTOP
VIN: = 16VDC
C
STEP 1.) LOCATING THE REQUIRED VOLTAGE
YOU CAN FIND THE REQUIRED DC OUTPUT VOLTAGE ON ONE OF THE THREE OPTIONS SHOWN ABOVE.
STEP 2.) VERIFYING CENTER POSITIVE POLARITY
LOOK FOR THE SYMBOL ABOVE IN ANY OF THE THREE LOCATIONS MENTIONED ABOVE.
IF THIS SYMBOL DOES NOT MATCH DO NOT USE PPU916RS.
STEP 3.) SETTING THE CORRECT VOLTAGE ON THE PPU916RS
SLIDE THE SWITH TO MATCH THE REQUIRED VOLTAGE YOU FOUND ON STEP 1.
SLIDING BUTTON BETWEEN 16V/19V SELECTION
STEP 4.) LOCATING THE CORRECT ADAPTER TIPS
VERIFY THE CORRECT ADAPTER TIPS NEEDED FOR YOUR LAPTOP BY VISITING
WWW.LENMAR.COM/ADAPTERTIPS.
CHARGING TIP
POWER TIP
L01D
L51D
L52D
L53D
L54D
L55D
L61D
L62D
L01
L51
L53
L54
L55
L61
L62
STEP 5.) CHARGING THE PPU916RS
USING YOUR LAPTOP’S ORIGINAL AC ADAPTER, PLUG THE CHARGING TIP FOUND IN
STEP 4 INTO YOUR AC ADAPTER, THEN PLUG INTO THE “IN” PORT OF THE PPU916RS.
PPU916RS
CHARGE TIP
ORIGINAL NOTEBOOK AC ADAPTER
STEP 7.) CAPACITY INDICATOR
PRESS THE BUTTON ON THE TOP OF THE PPU916RS TO SHOW
REMAINING CAPACITY, THERE ARE 4 INDICATOR LIGHTS.
STEP 8.) USB POWER PORT
PPU916RS
1 23 45BUTTON
LED
CHARGING
INDICATOR
CAPACITY
INDICATOR
LED 1 indicates 0% to 25%
LED 2 indicates 25% to 50%
LED 3 indicates 40% to 60%
LED 4 indicates 75% to 100%
STEP 6.) OPERATING THE PPU916RS
CONNECT THE POWER TIP TO THE OUTPUT CABLE AND PLUG IN AS SHOWN ABLOVE.
DC “OUT” PORT
DC “IN” PORT
PPU916RS
OUTPUT CABLE OUTPUT TIP
THE PPU916RS HAS A BUILT IN USB PORT FOR THE CONVENIENCE OF CHARGING YOUR
CELL PHONE, PDA, MP3 PLAYER OR ANY OTHER DEVICE THAT CAN BE CHARGED FROM A
STANDARD USB PORT. FOR BEST RESULTS USE AN OEM OR FACTORY APPROVED USB
CABLE. NOTE: THIS IS NOT COMPATIBLE WITH TABLETS.
NOTE: FOR MORE SPECIFIC DETAILED INSTRUCTIONS PLEASE REFER TO THE COMPLETE
OWNER’S MANUAL.
USB PORT