Filter
Top Products
Instructions
1
2
3
1
2
3
5
4
Limited 1 Year Warranty
Lenmar product is warranted to be free of defective parts and workmanship
for stated period from the original date of purchase. Warranties are non-
transferable. The warranty excludes damage resulting from accident, misuse,
modification, delay or loss of use, damage to equipment or by normal wear
and tear.
ALL WARRANTY REQUESTS MUST BE SUBMITTED AT:
www.lenmar.com/warranty
INCLUDE A COPY OF ORIGINAL PROOF OF PURCHASE WITH RETURNED
PRODUCT OR THE CLAIM WILL BE DENIED.
Copy of Proof of Purchase from an authorized Lenmar Dealer must include the
following:
- The company where the product was purchased
- The date of purchase
- The model number of the product purchased
- Send back the product freight prepaid (we recommend insuring the package
as Lenmar will not be responsible for shipments lost or damaged in transit).
Include $7.50 payable to Lenmar Battery Solutions for processing fee for ship
to address in the Continental United States.
Include $12.50 for ship to address in Hawaii, Alaska or Canada.
Send to:
Lenmar Battery Solutions
Attn: Return Department
4035 Via Pescador
Camarillo, CA 93012-5050
Use preprinted Lenmar shipping label or clearly print your RA Number on the
outside of the shipping carton.
For additional questions, comments or to explore other Lenmar battery
solutions, visit our web site at: www.lenmar.com or call 800/424-2703 from
9AM – 5PM PST.
Caution
• The product provides current and voltage surge protection as well as short-
circuit protection and is suitable for charging 3.6 & 3.7V lithium batteries
• Do not leave the charger in wet conditions or under high temperatures
• It is normal for the charger to become warm when in use; this will not
damage the battery
• Do not charge non-rechargeable batteries
Specifications
Battery Type: Rechargeable 3.6-3.7V Li-Ion batteries
Power: DC 5V USB interface Model A
Voltage: DC5.0V 0.25V for input and DC4.2 0.005V for output
Charging Current: MAX 500mA
Working Environment: Temperature 0-45C, Humidity 20-60%
Size: 47mm x 26.5mm x 27mm
Weight: Approx. 11g
Flip up the USB connector on the PPUCLIP.
Press the back of the top cover to open the PPUCLIP.
Slide the battery towards the PPUCLIP’s contacts, adjusting them so
that one contact touches the positive (+) terminal of the battery and
the other touches the negative (-) terminal. There is no need to worry
about positive and negative polarity connections - the polarity is auto
sensing and adjusts accordingly.
When the battery is installed correctly and making proper contact the
green LED will turn on.
Insert the USB end of the PPUCLIP into any USB port. Both the red and
green LEDs will turn on indicating the battery is charging.
The red LED will gradually dim as the battery reaches a full
charge. When the battery reaches a full charge, the red LED will
turn off and the green LED remains on, indicating a full charge.
Model: PPUCLIP
PowerPort™ Clip USB Battery Charger
PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS
PRODUCT. IT CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR
YOUR UNIT.
POWERED BY
6
310-669-07-1110 r2 y1