Lenovo 3444GXU Tablet User Manual


 
tells each user the password for his or her computer. The user can then change the user password as
desired, but the administrator still can get access by using the master password.
Note: When a master hard disk password is set, only the administrator can remove the user hard disk
password.
Setting a hard disk password
1. Print these instructions.
2. Save all open les, and exit all applications.
3. Turn your computer off and then on again.
4. When the logo screen is displayed, press F1. The ThinkPad Setup program main menu opens.
5. Select Security, using the cursor directional keys to move down the menu.
6. Select Password.
7. Select Hard Disk 1 Password.
8. A password window opens. You are prompted to select User or User + Master. Select User if you want
to set only one hard disk password. If you are an administrator or supervisor, you can select User +
Master to set two passwords. (The user can change the user password later.)
If you select User + Master, do the following:
a. When a window for typing the new user hard disk password opens, type your new password in
the Enter New Password eld. Press Enter.
b. In the Conrm New Password eld, retype the password you just entered to verify it. Press Enter.
c. A message window opens and prompts you to set the master hard disk password. Press Enter to
continue.
d. A window for typing the new master hard disk password opens. Type your new password in
the Enter New Password eld. Press Enter.
e. In the Conrm New Password eld, retype the password you just entered to verify it. Press Enter.
If you select User only, do the following:
a. When a window for typing the new password opens, type your new password in the Enter New
Password eld. Press Enter.
Notes:
You can set the minimum length of a hard disk password through the Security menu.
If you set a hard disk password of over seven characters, the solid-state drive can be used
only with a computer that can recognize a hard disk password of over seven characters. If you
then install the solid-state drive in a computer that cannot recognize a hard disk password that
contains more than seven characters, you cannot get access to the drive.
b. In the Conrm New Password eld, retype the password you just entered to verify it. Press Enter.
Attention: You might want to record your passwords and store them in a safe place. Otherwise, if you
forget the user password, or both user and master passwords, Lenovo cannot reset your passwords
or recover data from the solid-state drive. You must take your computer to a Lenovo reseller or a
marketing representative to have the solid-state drive replaced. Proof of purchase is required, and a fee
will be charged for parts and service.
9. In the Setup Notice window that is displayed, press Enter to continue.
10. Press F10. The Setup Conrmation window opens. Select Yes to save conguration changes and exit.
The next time you turn on your computer, you will have to type the user or master hard disk password in
order to start your computer and get access to your operating system.
Chapter 4. Security 47