Filter
Top Products
Diagnostic Error Code FRU/Action
000-197-XXX BIOS test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility” on page 41
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
000-198-XXX BIOS test aborted
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility” on page 41
2. Flash the system and retest. See “Flash update
procedures” on page 251
3. Go to “Undetermined problems” on page 75
000-199-XXX BIOS test failed, cause unknown 1. Go to “Undetermined problems” on page 75
2. Flash the system and re-test
3. Replace component under function test
000-250-XXX BIOS APM failure 1. Flash the system. See “Flash update procedures”
on page 251
2. System board
000-270-XXX BIOS ACPI failure 1. Flash the system. See “Flash update procedures”
on page 251
2. System board
001-000-XXX System Test Passed
No action
001-00X-XXX System Error System board
001-01X-XXX System Error System board
001-024-XXX System Addressing test failure System board
001-025-XXX System Checksum Value error 1. Flash the system. See “Flash update procedures”
on page 251
2. System board
001-026-XXX System FLASH data error 1. Flash the system. See “Flash update procedures”
on page 251
2. System board
001-027-XXX System Conguration/Setup error 1. Run Setup
2. Flash the system. See “Flash update procedures”
on page 251
3. System board
001-032-XXX System Device Controller failure System board
001-034-XXX System Device Buffer Allocation failure
1. Reboot the system
2. Flash the system. See “Flash update procedures”
on page 251
3. Run memory test
4. System board
001-035-XXX System Device Reset condition detected System board
001-036-XXX System Register error System board
Chapter 9. Symptom-to-FRU Index 55