Lenovo 4158 Personal Computer User Manual


  Open as PDF
of 270
 
Conguring the Marvell BIOS Setup to enable SATA or SAS RAID 0, 1,
5, or 10 functionality
To enable SATA/SAS RAID functionality, use the Marvell BIOS Setup conguration utility as the SATA/SAS
conguration utility. This utility assumes that the system has the required number of hard disk drives.
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell BIOS Setup.
2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Cong and press Enter. The
RAID Cong menu opens.
3. From the RAID Cong menu, select Create array.
4. Use the arrow keys and the Enter key to select each free hard disk drive that you want to include
in the array.
5. Select Next and press Enter.
6. From the Create array menu, select RAID level and press Enter.
Note: Only the valid RAID levels will be active.
7. Select your desired RAID level (RAID 0, RAID 1, RAID 5, or RAID 10) and press Enter.
8. From the Stripe size menu, you can change the stripe size or keep it as default.
9. Type a proper array name in the Array name eld.
10. Select Next and press Enter.
11. When prompted, press Y to complete the array creation and RAID conguration.
Conguring the Marvell BIOS Setup to set an optional hot spare hard
disk drive
To congure the Marvell BIOS Setup to set an optional hot spare hard disk drive:
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell BIOS Setup.
2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Cong and press Enter. The
RAID Cong menu opens.
3. From the RAID Cong menu, select Spare Management.
4. Use the arrow keys to select the hard disk drive you want to set as an optional hot spare hard disk drive.
5. Use the arrow keys to select Next and press Enter.
6. Press Y when prompted to set the optional hot spare hard disk drive.
Conguring the Marvell BIOS Setup to delete an optional hot spare
hard disk drive
To congure the Marvell BIOS Setup to delete an optional hot spare hard disk drive:
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell BIOS Setup.
2. On the Marvell BIOS Setup screen, use the arrow keys to select RAID Cong and press Enter. The
RAID Cong menu opens.
3. From the RAID Cong menu, select Spare Management.
4. Use the arrow keys to select the optional hot spare hard disk drive you want to delete.
5. Use the arrow keys to select Next and press Enter.
6. Press Y when prompted to delete the optional hot spare hard disk drive.
Conguring the Marvell BIOS Setup to delete an array
To congure the Marvell BIOS Setup to delete an array:
1. Turn on your computer and press Ctrl+M when prompted to enter the Marvell BIOS Setup.
50 ThinkStation Hardware Maintenance Manual
 previous next