Filter
Top Products
Diagnostic Error Code FRU/Action
030-196-XXX SCSI interface test halt, error threshold
exceeded
1. Press F3 to review the log le.
2. Restart the test to reset the log le.
030-197-XXX SCSI interface test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 53
.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
030-198-XXX SCSI interface test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 53
.
2. Flash the system and re-test. See “Flash update
procedures” on page 151.
3. Go to “Undetermined problems” on page 78.
030-199-XXX SCSI interface test failed, cause unknown 1. Go to “Undetermined problems” on page 78.
2. Flash the system and re-test. See “Flash update
procedures” on page 151.
3. Replace component under function test.
035-000-XXX RAID interface Test Passed
No action
035-0XX-XXX RAID interface Failure
1. RAID signal cable
2. RAID device
3. RAID adapter card, if installed
4. System board
035-195-XXX RAID interface Test aborted by user Information only Restart the test, if necessary.
035-196-XXX RAID interface test halt, error threshold
exceeded
1. Press F3 to review the log le.
2. Restart the test to reset the log le.
035-197-XXX RAID interface test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 53
.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
035-198-XXX RAID interface test aborted 1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 53
.
2. Flash the system and re-test. See “Flash update
procedures” on page 151.
3. Go to “Undetermined problems” on page 78.
035-199-XXX RAID interface test failed, cause unknown
1. See “Undetermined problems” on page 78.
2. Flash the system and re-test. See “Flash update
procedures” on page 151.
3. Replace component under function test.
071-000-XXX Audio port Interface Test Passed
No action
Chapter 7. Symptom-to-FRU Index 69