Filter
Top Products
Figure 32. Cable routing
4. Lower the optical drive bay assembly.
5. Close the computer cover.
6. If there is an integrated cable lock available, lock the computer.
7. Reconnect the external cables and power cords to the computer. See “Locating connectors on the rear
of your computer” on page 7.
8. To update your conguration, see Chapter 4 “Using the Setup Utility” on page 41.
Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit
(CRU). Information about this will come with the CRU or will come a few days after the CRU arrives.
Obtaining device drivers
You can obtain device drivers for operating systems that are not preinstalled at
http://www.lenovo.com/support. Installation instructions are provided in readme les with the device-driver
les.
Installing security features
There are several security options available to help you prevent hardware theft and unauthorized access to
your computer. In addition to physical locks, you can also prevent unauthorized use of your computer by a
software lock that locks the keyboard until a correct password is typed in.
Note: Make sure that any security cables you installed do not interfere with other computer cables.
Integrated cable lock
An integrated cable lock, sometimes referred to as the Kensington lock, can be used to secure your
computer to a desk, table, or other non-permanent xture. The cable lock attaches to the integrated cable
lock slot at the rear of your computer and is operated with a key. The cable lock also locks the buttons used
to open the computer cover. This is the same type of lock used with many notebook computers. You can
order an integrated cable lock directly from Lenovo by searching for Kensington at:
http://www.lenovo.com/support
Chapter 2. Installing or replacing hardware 33