Filter
Top Products
3. In some models, you might have to remove the PCI adapters to gain access to
system board components.
4. Using the blue handle 1, lift and slide the drive bay assembly forward until
the locating studs in the drive bay assembly are aligned with the slots on the
sides of the chassis. Pull upward on the handle to remove the drive bay
assembly completely from the chassis. Depending on what component of the
computer you want to remove, you can either disconnect the cables from the
rear of the drives or leave them connected.
Figure 7. Removing the PCI adapter
Figure 8. Removing the drive bay assembly
Chapter 3. Installing options and replacing hardware 11