Filter
Top Products
v The electromagnetic interference (EMI) integrity and cooling of the server are
protected by having all bays, and PCI and PCI Express slots covered or
occupied. When you install a drive, PCI, or PCI Express adapter, save the EMC
shield and filler panel from the bay or the PCI or PCI Express adapter slot cover
in the event that you later remove the device.
v For a list of supported optional devices for the server, go to:
http://www.lenovo.com/accessories/.
Installing a CD or DVD drive
To install a CD or DVD drive, complete the following steps:
1. Read the safety information that begins on page v and “Installation
guidelines” on page 7.
2. Turn off the server and peripheral devices, and disconnect the power cords
and all external cables.
3. Remove the side cover (see “Removing the side cover” on page 10).
4. Remove the two-piece bezel (see “Removing the two-piece bezel” on page 11).
5. Use a screwdriver to pry the filler panel and EMC shield away from the
server.
Note: If you are installing a drive that contains a laser, observe the following
safety precaution.
Statement 3:
CAUTION:
When laser products (such as CD drives, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v Do not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
v Use of controls or adjustments or performance of procedures other than
those specified herein might result in hazardous radiation exposure.
18 ThinkServer TS100 Types 6431, 6432, 6433, 6434: Installation Guide