Filter
Top Products
Updating the server configuration
When you start the server for the first time after you add or remove an internal or
external device, you might receive a message that the configuration has changed.
The Configuration/Setup Utility program starts automatically so that you can save
the new configuration settings. For more information, see the section about
configuring the server in the User Guide on the ThinkServer Documentation DVD.
Some optional devices have device drivers that you must install. For information
about installing device drivers, see the documentation that comes with each device.
If the server has a RAID adapter and you have installed or removed a hard disk
drive, see the documentation that comes with the adapter for information about
reconfiguring the disk arrays.
If you have installed a Remote Supervisor Adapter II SlimLine to manage the
server remotely, see the Remote Supervisor Adapter II documentation for
information about setting up, configuring, and using the adapter.
34 ThinkServer TS100 Types 6431, 6432, 6433, 6434: Installation Guide