Filter
Top Products
Table 11. Abbreviated list of POST error codes (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v See the parts listing in the Hardware Maintenance Manual to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
1601 System-management adapter
communication error.
1. Update the BMC firmware (see
“Updating the Firmware” in the
Hardware Maintenance Manual).
2. (Trained service technician only) Replace
the system board.
1603 System-management adapter
communication error.
1. Make sure that the Remote Supervisor
Adapter II SlimLine is installed correctly.
2. Update the Remote Supervisor Adapter
II SlimLine firmware (see “Updating the
firmware” in the Hardware Maintenance
Manual).
3. Reseat the following components:
a. Adapter
b. (Trained service technician only)
System board
4.
Replace the following components one at
a time, in the order shown, restarting the
server each time:
a. Remote Supervisor Adapter II
SlimLine
b. (Trained service technician only)
Replace the system board.
1762 Hard disk drive configuration error.
1. Run the Configuration/Setup Utility
program and load the default settings.
2. Reseat the following components:
a. Hard disk drive cables
b. Hard disk drive
c. (Trained service technician only)
System board
3.
Replace the following components one at
a time, in the order shown, restarting the
server each time.
a. Hard disk drive cables
b. Hard disk drive
c. (Trained service technician only)
System board
56 ThinkServer TS100 Types 6431, 6432, 6433, 6434: Installation Guide