Filter
Top Products
7. With the notched end of the memory module toward the contact edge side of the socket, insert the
memory module 1 into the socket at an angle of about 20 degrees; then press it in rmly 2 .
Note: If you install a memory module in only one of the two memory slots, install it in the bottom slot.
8. Pivot the memory module downward until it snaps into place.
9. Make sure that the memory module is rmly seated in the slot and cannot be moved easily.
10. Reinstall the computer cover 1 . Then tighten the screws 2 .
11. Reinstall the battery. For more information about how to reinstall the battery, refer to “Replacing the
battery” on page 69.
12. Turn the computer over again and reconnect the cables.
Chapter 6. Replacing devices 83