Lenovo I53427U4GB Tablet User Manual


 
Tips on using the multi-touch screen
The multi-touch screen is a glass panel covered with a plastic lm. Do not apply pressure or place any
metallic object on the screen, which might damage the touch panel or cause it to malfunction.
Do not use inanimate objects, ngernails, or gloved ngers for input on the screen.
Regularly calibrate the accuracy of the nger input to avoid a discrepancy.
Tips on cleaning the multi-touch screen
Turn off the computer before cleaning the multi-touch screen.
Use a dry, soft, and lint-free cloth or a piece of absorbent cotton to remove ngerprints or dust from the
multi-touch screen. Do not apply solvents to the cloth.
Gently wipe the screen using top-down motion. Do not apply any pressure on the screen.
Using the UltraNav pointing device
Your computer comes with the UltraNav pointing device. The UltraNav pointing device consists of the
TrackPoint pointing device and the touch pad, each of which is itself a pointing device with both basic and
extended functions. You can congure both devices by choosing the settings you prefer as follows:
Set both the TrackPoint pointing device and the touch pad as pointing devices.
This setting enables the use of all the basic and extended functions of the TrackPoint pointing device
and the touch pad.
Set the TrackPoint pointing device as the main pointing device and the touch pad for extended
functions only.
This setting enables the use of all basic and extended functions with the TrackPoint pointing device while
limiting the use of the touch pad to scrolling, tap zones, and slow-motion pointer functions.
Set the TrackPoint pointing device as the main pointing device, and disable the touch pad.
Set the touch pad as the main pointing device, and disable the TrackPoint pointing device.
Changing the UltraNav pointing device settings
To change your UltraNav pointing device settings, go to Control Panel and click Hardware and Sound
Mouse UltraNav. Then change the settings as desired.
Using the TrackPoint pointing device
The TrackPoint pointing device consists of a pointing stick 1 on the keyboard and three click buttons at the
bottom of the keyboard. To move the pointer 5 on the screen, you apply pressure to the nonslip cap on the
pointing stick in any direction parallel to the keyboard; the pointing stick itself does not move. The speed at
which the pointer moves depends on the pressure you apply to the pointing stick. The functions of the left
4
and right 2 click buttons correspond to those of the left and right mouse buttons on a conventional mouse.
The TrackPoint center button 3 , called the scroll bar, enables you to scroll Web pages or documents in any
direction with no need to use the graphic scroll bars on the side of the window.
Note: Your computer might have slight variations from the following illustration.
Chapter 2. Using your computer 23