Lenovo I53427U4GB Tablet User Manual


 
Cong menu
If you need to change the conguration of your computer, select Cong from the ThinkPad Setup program
main menu.
The following table shows the contents of the Cong menu.
Notes:
Default values are in boldface. The default settings are already optimized for you. If you consider
changing the computer conguration, proceed with extreme caution. Setting the conguration incorrectly
might cause unexpected results.
On each submenu, press the Enter key to show selectable options and select a desired option by using
cursor key, or type desired values from the keyboard directly.
Some items are displayed on the menu only if the computer supports the corresponding features.
Table 5. Cong menu items
Menu item
Submenu item Selection Comments
Wake On LAN
Disabled
AC only
AC and Battery
Enable the system to power
on when the Ethernet
controller receives a magic
packet (a special network
message).
If you select AC Only, Wake
on LAN is enabled only
when the ac power adapter
is attached.
If you select AC and
Battery, Wake on LAN is
enabled with any power
sources.
Notes:
The magic packet type
Wake on LAN requires
ac power.
The Wake on LAN
function does not
work when a hard disk
password is set.
Ethernet LAN Option ROM
(for Legacy Only boot
mode or Both with Legacy
rst)
Disabled
Enabled
Load the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.
UEFI IPv4 Network Stack
(for UEFI Only boot mode
or Both with UEFI rst)
Disabled
Enabled
Enable or disable Internet
Protocol Version 4 (IPv4)
network stack for UEFI
environment.
UEFI IPv6 Network Stack
(for UEFI Only boot mode
or Both with UEFI rst)
Disabled
Enabled
Enable or disable Internet
Protocol Version 6 (IPv6)
network stack for UEFI
environment.
Network
70 User Guide