Lenovo K1 Tablet User Manual


 
44
IdeaPad Tablet K1 Hardware Maintenance Manual
1100 Integrated camera
For access, remove these FRUs in order:
“1010 Base cover” on page 31
“1020 Battery pack” on page 33
“1030 Middle cover” on page 34
“1040 Docking bracket” on page 35
“1050 System board” on page 36
“1060 Switch board, SD board and HDMI board” on page 38
“1070 Speaker” on page 41
“1080 Optical nger navigation (OFN) module” on page 42
“1090 Panel support bracket” on page 43
Figure 10. Removal steps of integrated camera
Note: Remove one screw
1
, and then remove the integrated camera from the
LCD cover in the direction shown by arrow
2
.
1
2
Step Screw (quantity) Color Torque
1
M4.5 x 3 mm, at-head, nylon-coated (1) Silver 1.5-2.0 kg/cm
When installing: Stick the integrated camera to the top center of the LCD
cover and ajust the placement of it to make sure the connector is attached
rmly.