Lenovo T430 Tablet User Manual


 
Enabling or disabling the Boot Order Lock feature
Enabling or disabling the Flash BIOS Updating by End-Users feature
Enabling or disabling the internal network device
Enabling or disabling the internal wireless device
Enabling or disabling the internal Bluetooth device
Enabling or disabling the internal wireless WAN device
Enabling or disabling the Security mode
Enabling or disabling the ngerprint reader priority
Erasing the ngerprint data
Notes:
The system administrator can set the same supervisor password on many ThinkPad notebook computers
to make administration easier.
By enabling the Lock UEFI BIOS Settings feature on the Password menu when you set the supervisor
password, you make it impossible for anyone but you to make changes.
Setting, changing, or removing a supervisor password
Only a system administrator can set, change, or remove a supervisor password.
To set, change, or remove a supervisor password, do the following:
1. Print these instructions.
2. Save all open les, and exit all applications.
3. Turn your computer off and then turn it on again.
4. When the logo screen is displayed, press F1. the ThinkPad Setup program main menu opens.
5. Select Security, using the cursor directional keys to move down the menu.
6. Select Password.
7. Select Supervisor Password.
8. A window opens, prompting you to enter a new password. Depending on your needs, do one of the
following:
To set a password, do the following:
a. Choose your supervisor password and type it in the Enter New Password eld; then press Enter.
b. Press Enter to move to the next line. Retype the password you just entered to verify it.
To change a password, do the following:
a. In the Enter Current Password eld, type the current supervisor password.
b. In the Enter New Password eld, type the new supervisor password; then retype the password
you just entered to verify it in the Conrm New Password eld.
To remove a password, do the following:
a. In the Enter Current Password eld, type the current supervisor password.
b. Leave the Enter New Password and Conrm New Password elds blank.
9. Commit your password to memory and press Enter. A Setup Notice window is displayed.
Attention: You might want to record your password and store it in a safe place. If you forget your
supervisor password, Lenovo cannot reset your password. You must take your computer to a Lenovo
reseller or a Lenovo marketing representative to have the system board replaced. Proof of purchase is
required, and a fee will be charged for parts and service.
Chapter 4. Security 55