Filter
Top Products
Table 17. Installation steps of keyboard
When installing the keyboard, do as follows:
1. Attach the keyboard connectors.
2. Attach the keyboard so that the front edge of the keyboard are under the frame as shown in this gure.
3. Secure the keyboard by tightening the screws from the bottom side of the computer.
1090 Palm rest assembly, power-on board assembly (with cable), and
microphone
For access, remove these FRUs in order:
• “1010 Battery pack” on page 50
• “1020 Bottom door” on page 51
• “1030 Hard disk drive (HDD)” on page 54
• “1080 Keyboard” on page 61
Table 18. Removal steps of palm rest assembly, power-on board assembly (with cable), and microphone
Note: The power-on board assembly (with cable) and the microphone are attached to the palm rest assembly.
64 ThinkPad X100e and X120e Hardware Maintenance Manual