1100 Palm rest or palm rest with fingerprint reader
For access, remove these FRUs in order:
v “1010 Battery pack” on page 60
v “1020 Second battery or travel cover (some models)” on page 61
v “1070 Keyboard” on page 72
Table 21. Removal steps of palm rest
1
2
Step Screw (quantity) Color Torque
2 M2 × 3 mm, small-head, nylon-coated (1) Black 0.167 Nm
(1.7
kgfcm)
Note:
In
models with the fingerprint reader, the sensor is attached to the palm rest
FRU. If the fingerprint reader has any defects, you can replace it by the
procedures given in this section, which are the same for a palm rest with or
without a fingerprint reader.
78 ThinkPad X300 Hardware Maintenance Manual