Filter
Top Products
79
Lenovo IdeaPad Y560
1210 Antenna assembly and LCD cover
For access, remove these FRUs in order:
• “1010 Battery pack” on page 35
• “1020 Dummy cards” on page 36
• “1030 Hard disk drive (HDD) slot cover and HDD” on page 37
• “1040 Optical drive” on page 39
• “1050 Thermal slot cover” on page 40
• “1060 DIMM” on page 41
• “1070 Fan assembly and Heat Sink assembly” on page 42
• “1090 SIM card slot cover” on page 46
• “1110 PCI Express Mini Card for wireless LAN/WAN and TV card” on page 48
• “1120 Keyboard cover, system status indicator board and touch inductive
panel” on page 52
• “1130 Keyboard” on page 55
• “1140 Keyboard bezel, speakers, power board and volume buttons board”
on page 56
• “1150 System board, ExpressCard slot assembly and bluetooth daughter
card” on page 63
• “1160 LCD unit” on page 68
• “1180 LCD front bezel” on page 73
• “1190 LCD panel, LCD cable and hinges” on page 75
Figure 21. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the
cables from the cable guide, and then remove the antenna assembly in the
direction shown by arrows
1
.
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.