Filter
Top Products
50
IdeaPad Z360 Hardware Maintenance Manual
Figure 12. Removal steps of keyboard bezel (continued)
Remove two screws
4
. Pull out the black antenna cable form the guide hole
and release it from the cable guide in the direction shown by arrow
5
. Detach
the LCD connector in the direction shown by arrow
6
.
4
5
6
4
Step Screw (quantity) Color Torque
4
M2.5 × 5.0 mm, at-head, nylon-coated (2) Black 2.5±0.2 kgfcm
When installing:
Route the antenna cables along the cable guides. As you route the cables, •
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the LCD connector is attached rmly and make sure that you •
do not pinch the antenna cables when you attach the LCD assemblly. Route
the LCD cable along the cable guides.