57
Lenovo IdeaPad Z360
1150 LCD unit
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1020 Dummy card” on page 35
• “1030 Hard disk drive (HDD)/PCI Express Mini Card slot cover” on page 36
• “1040 Hard disk drive ” on page 37
• “1050 Optical drive” on page 38
• “1060 PCI Express Mini Card for wireless LAN/WAN” on page 39
• “1070 DIMM/thermal slot coverr” on page 41
• “1080 DIMM” on page 42
• “1090 Fan assembly and Heat Sink assembly” on page 43
• “1110 Keyboard” on page 47
• “1120 Keyboard bezel” on page 49
• “1140 System board” on page 55
Figure 15. Removal steps of LCD unit
Pull out the white antenna cable from the guide hole and release it from the
cable guides in the direction shown by arrows
1
. Remove ve screws
2
.
1
1
2
2
2
2
2
Step Screw (quantity) Color Torque
2
M2.5 × 5.0 mm, at-head, nylon-coated (5) Black 2.5±0.2 kgfcm
When installing:
Route the antenna cables along the cable guides. As you route the cables, •
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.