Filter
Top Products
9. Attach the side covers to a new hard disk drive.
10. Insert the new hard disk drive into the hard disk drive bay; then firmly
install it.
11. Replace the hard disk drive bay cover and reinstall the screw.
12. Reinstall the battery.
13. Turn the computer over again. Connect the ac adapter and the cables to
the computer.
Replacing the battery
1. Turn off the computer, or enter hibernation mode. Then disconnect the ac
adapter and all cables from the computer.
Note:
If you are using a PC Card, the computer might not be able to enter
hibernation mode. If this happens, turn off the computer.
2. Close the computer display, and turn the computer over.
3. Unlock the battery latch by sliding it to the left 1. Then remove the
battery2.
4. Install a fully charged battery. Press the battery firmly into the connector
until you hear a click.
Upgrading the hard disk drive
40 ThinkPad
®
Z60t and Z60m Series Service and Troubleshooting Guide