Filter
Top Products
Using the Finishing menu
Use the Finishing menu to adjust settings for such features as Collate, Separator Sheets, and N-up (Multipage) printing.
You can use the settings to collate pages, to insert separator sheets between print jobs, and to print up to 16 images
on a single page. To access the Finishing menu, do one of the following:
• If the printer is connected to a network, open the Embedded Web Server by typing the printer IP address into
the address field of your Web browser. From the Settings tab, click Print Settings, and then click Finishing
Menu.
• If the printer is connected to a computer by a USB or parallel cable, open the Local Printer Settings Utility for
Windows or Printer Settings for Macintosh. One of these utilities installs with the printer software.
Paper menu
Default Source menu
Menu item Description
Default Source
Tray <x>
Manual Paper
Manual Env
Sets a default paper source for all print jobs
Notes:
• Tray 1 (standard tray) is the factory default setting.
• Only an installed paper source will appear as a menu setting.
• A paper source selected for a print job overrides the Default Source setting
for the duration of the print job.
• If the same size and type of paper are in two trays and the Paper Size and
Paper Type settings match, the trays are automatically linked. When one
tray is empty, the job prints using paper from the linked tray.
Size/Type menu
Menu item Description
Select Source menu
Tray 1
Tray 2
Manual Paper
Manual Envelope
These menus let you specify the installed paper size and type in the selected
tray or manual feeder.
Note: Only installed trays and feeders are listed in this menu.
Understanding printer menus
67