Lexmark 120n Printer User Manual


 
Overview of the Lexmark E120n operator panel
36
Using the operator panels
Insufficient collation area
Load media
Light sequence:
Continue—On
Error—On
Secondary light sequence:
Press twice quickly to see the secondary light
sequence.
Continue—On
Toner Low/Replace PC Kit—On
Error—On
Message:
Printer memory does not have the free space necessary to collate print job. May occur due to one of the errors
listed below:
Printer memory is full.
A page is too complex to print.
Memory is insufficient to save what is in the print buffer.
Solution:
Turn printer off and back on to try printing the page again. If not successful:
Press to clear message and continue processing the job (some print data may be lost).
To avoid this error in the future:
Reduce complexity of the page by reducing the amount of text or graphics.
Set Page Protect to On in the Local Printer Setup Utility (see Software and Documentation CD).
Light sequence:
Continue—On
Load / Remove Paper—On
Message:
Printer is out of media, or media did not feed properly.
Solution:
Load media into Tray 1 or priority feeder, and press to resume.
Ensure media is loaded correctly in Tray 1 or priority feeder.
Press to cancel print job.
Primary light
sequence
Secondary light
sequence