Lexmark X204N Printer User Manual


 
39 Complex page, some data may not have printed
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press to clear the message and continue printing.
Cancel the current print job.
54 Standard network software error
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press to continue printing.
Turn the printer off and then back on to reset the printer.
Upgrade (flash) the network firmware in the printer or print server.
54 Network <x> software error
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press to continue printing.
Turn the printer off and then back on to reset the printer.
Upgrade (flash) the network firmware in the printer or print server.
56 Standard USB port disabled
Try one or more of the following:
The printer discards any data received through the USB port. Press to clear the message and continue printing.
Make sure the USB Buffer menu item is not set to Disabled.
84 PC Kit life warning
The photoconductor kit is near exhaustion.
Try one or more of the following:
Replace the photoconductor kit.
Press to clear the message and continue printing.
84 Replace PC Kit
The photoconductor kit is exhausted. Install a new photoconductor kit.
88.yy Cartridge is low
Replace the toner cartridge, and then press to clear the message and continue printing.
200–250 paper jam
1 Clear the paper path. For more information, see “Clearing jams” on page 132.
2 After clearing the paper path, press to resume printing.
Troubleshooting
129