Open as PDF
button on the bottom of the Monitor set
to display the
Set the options by pressing the ◄ or ► or ▼
Select the "
" button to enter the more
to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
Menu>NextMenu Analog Digital Description
Sharpness ● ●
To adjust the clearness of the screen
To customize the color of the screen
To adjust the position of the screen
To improve the clarity and stability of the screen
To customize the screen status for a user's operating
OffTimeSetting ● ●
D-SUB(Analog signal) input.
DVI-D(Digital signal) input.
Menu Analog Digital Description
Brightness ● ●
To adjust the brightness of the screen
Contrast ● ●
To adjust the contrast of the screen
You can set a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use 'Off'. For a fast-moving
picture, it is recommended that you use 'High'.
Switch to full screen mode according to input image signal.
Change the input image signal ratio to original.
* This function works only if input resolution is lower than Monitor set ratio (16:9).
Restore all factory default settings. Press the
buttons to reset immediately.