Open as PDF
ASSEMBLING AND PREPARING
Lift the monitor and place it on the table in an
Install at least
away from the wall to
ensure sufficient ventilation.
Press the (Power) button on the front of the
monitor to turn on the monitor.
Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as may injure your
Do not touch or press the screen when
adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor
screen can detach from stand base and injure
Tilt from +20 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.