Filter
Top Products
Owner’s Manual 37
External Control Device Setup
20. Green Adjustment (Command 2 : w)
G To adjust green in color temperature.
Transmission
Data Min : 0 ~ Max : 50
*
Refer to ‘Real data mapping 2’. See page 36.
[k][w][ ][Set ID][ ][Data][Cr]
Ack
[w][ ][Set ID][ ][OK][Data][x]
21. Blue Adjustment (Command 2 : $)
G To adjust blue in color temperature.
T
ransmission
Data Min : 0 ~ Max : 50
*
Refer to ‘Real data mapping 2’. See page 36.
[k][$][ ][Set ID][ ][Data][Cr]
Ack
[$][ ][Set ID][ ][OK][Data][x]
19. Red Adjustment (Command 2 : v)
G To adjust red in color temperature.
T
ransmission
Data Min : 0 ~ Max : 50
*
Refer to ‘Real data mapping 2’. See page 36.
[k][v][ ][Set ID][ ][Data][Cr]
Ack
[v][ ][Set ID][ ][OK][Data][x]
18. Color Temperature (Command 2 : u)
G To adjust color temperature.
You can also adjust ACC in the PICTURE menu.
T
ransmission
Data 0: Normal 1: Cool 2: Warm 3: Off
[k][u][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK][Data][x]
16. Bass (Command 2 : s)
G To adjust bass.
You can also adjust bass in the SOUND menu.
Transmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’. See page 35.
[k][s][ ][Set ID][ ][Data][Cr]
Ack
[s][ ][Set ID][ ][OK][Data][x]
15. Treble (Command 2 :r)
G To adjust treble.
You can also adjust treble in the SOUND menu.
Transmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’. See page 35.
[k][r][ ][Set ID][ ][Data][Cr]
Ack
[r][ ][Set ID][ ][OK][Data][x]
17. Balance (Command 2 : t)
G To adjust balance.
You can also adjust balance in the SOUND menu.
T
ransmission
Data Min : 0 ~ Max : 64
*
Refer to ‘Real data mapping 1’. See page 35.
[k][t][ ][Set ID][ ][Data][Cr]
Ack
[t][ ][Set ID][ ][OK][Data][x]
22. Abnormal State (Command 2 : z)
G To recognize an abnormal state.
Transmission
Data FF : Read
Data 0: Normal (Power on and signal exist)
1: No signal (Power on)
2: Turn the monitor off by remote control
3: Turn the monitor off by sleep time function
4: Turn the monitor off by RS-232C function
5: 5V down
6: AC down
7: Turn the monitor off by Fan Alarm function (option)
8: Turn the monitor off by Off time function
9: Turn the monitor off by Auto sleep function
a: Turn the monitor off by AV board detect
* This function is “read only”.
[k][z][ ][Set ID][ ][FF][ ][Cr]
Ack
[z][ ][Set ID][ ][OK][Data][x]
U514Aen 98/2/18 4:26 AM Page 37
Downloaded From TV-Manual.com Manuals