LG Electronics DCS-932L Webcam User Manual


 
30D-Link DCS-932L User Manual
Section 4 - Web Conguration
Mail
SMTP Server
Address:
Sender e-mail
Address:
Receiver e-mail
Address:
User Name:
Password:
ThisisthedomainnameorIPaddressofyourexternale-mailserver.
This is the e-mail address of the person sending the camera snapshots.
This is the e-mail address of the recipient.
If the SMTP server uses authentication, you must enter your user
name here.
This is the password that corresponds to your user name to connect
to the SMTP server.
This section allows you to congure the email notication settings for your camera.
Forexample,ifyouwanttouseGmailbySSL-TLSforthee-mailnotication,youcanfollowthe
setupprocedureasbelow:
Step 1 - Enter “smtp.gmail.com” in SMTP Server Address.
Step 2-ChangetheSMTPserverportnumberfrom25to465.
Step 3 - Enter your gmail E-mail address in Sender E-mail Address.
Step 4 - Enter the destination E-mail address in Receiver E-mail Address.
Step 5 - Enter the user name required to access the SMTP server.
Step 6 - Enter the password required to access the SMTP server.
Step 7 - Select SSL-TLS and then click Save Settings.
Step 8 - Click the Testbuttontosendateste-mailwillbesenttothee-mailaccountlistedabove.
Note:YoucanalsouseSTARTTLSwhichwilluseSMTPserverportnumber587.
Note:IfyouwanttousetheYahooSMTPserver,theSMTPserveraddresswillbedierentbetweeneachregisteredregion.AnditonlysupportstheSMTPserver
portnumber465 for the SSL-TLS.