Filter
Top Products
26
206-4183
Reload the Pro:Idiom Key on a Selected Transcoder
This command reloads the Pro:Idiom encryption key on a single transcoder card. Note that a
password is required to initiate this command.
1. With the Transcoder Menu on display, click on the down arrow at the right of the Card
Select eld, and select the appropriate transcoder card from the drop-down list of options.
2. Click on the Reload button at the right of the Reload PI Key eld.
3. At the pop-up window prompt for the password required to execute the operation, type the
password and click OK.
When the reload is complete, the system will display conrmation, for example:
Card 1:
Reloading the key ...
Successfully reloaded PI key
Satellite STB Menu Commands
The following subsections describe how to access and use the Satellite STB Menu commands.
Access the Satellite STB Menu
1. Access the CodePlus Transcoder Series web GUI as described on page 16.
2. With the Homepage on display, click on the Satellite STB menu tab or link.
The Satellite STB Menu (see example on following page) enables you to view and modify
selected satellite STB configuration settings.
Note: The Tuner Select field in the Satellite STB Menu is irrelevant and should be left at its
default value (Tuner “1”) when HCS7720 transcoder cards are being used. Results displays
that include tuner data for an HCS7720/ViP 222k STB pair will always specify Tuner 1.
Set the STB Channel
1. With the Satellite STB Menu on display, click on the down arrow at the right of the Card
Select eld, and select the appropriate card from the drop-down list of options.
2. Type the desired channel number (1 – 9999) in the Set Tuner Channel eld, and then click
on the Set button at the right of the entry eld.
If the channel is set successfully, the satellite STB will change to the specied DISH Network
channel and the system will display conrmation, for example:
Card 1 Tuner 1: Channel changed to 209
Conguration Options via GUI (Cont.)