LG Electronics M2362DP Computer Monitor User Manual


 
133
APPENDIX
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
The remote control
doesn’t work
Check to see if there is any object between the product and the remote
control causing obstruction. Ensure you are pointing the remote control
directly at the set.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR, etc.
Install new batteries.
Power is suddenly
turned off
Is the sleep timer set?
Check the power control settings. Power interrupted.
If the TV is switched on and there is no input signal, it will switch off
automatically after 15 minutes to save the power consumption.
When a broken file was played in the USB mode, the TV may turn off.
Please check the file in your usb storage.
Except the screen off mode of the energy saving menu.
The video function does not work.
No picture &No sound
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
Test the wall power outlet, plug another product’s power cord into the
outlet where the product’s power cord was plugged in.
Picture appears slowly
after switching on
This is normal, the image is muted during the product startup process.
Please contact your service centre, if the picture has not appeared
after five minutes.
No color, poor colour,
or poor picture
Adjust Colour in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
Activate any function to restore the brightness of the picture.
Horizontal / vertical bars
or picture shaking
Check for local interference such as an electrical appliance or power
tool.