LG Electronics M2362DP Computer Monitor User Manual


 
35
EXTERNAL EQUIPMENT SETUP
HDMI - DTV mode Component mode
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720 x 480
31.469
31.5
59.94
60
720 x 576 31.25 50
1280 x 720 37.500 50
1280 x 720
44.96
45
59.94
60
1920 x 1080
33.72
33.75
59.94
60
1920 x 1080 28.125 50.00
1920 x 1080 27 24
1920 x 1080 33.75 30.00
1920 x 1080 56.250 50
1920 x 1080
67.43
67.5
59.94
60
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720 x 480 15.73 59.94
720 x 480 15.75 60.00
720 x 576 15.625 50.00
720 x 480 31.47 59.94
720 x 480 31.50 60.00
720 x 576 31.25 50.00
1280 x 720 44.96 59.94
1280 x 720 45.00 60.00
1280 x 720 37.50 50.00
1920 x 1080 33.72 59.94
1920 x 1080 33.75 60.00
1920 x 1080 28.125 50.00
1920 x 1080 56.25 50
1920 x 1080 67.432 59.94
1920 x 1080 67.5 60.00
NOTE
►Avoid keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen use a screen saver when possible.
► There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC graph-
ic card can not be changed, change the PC
graphic card or consult the manufacturer of the PC
graphic card.
► The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
► Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the SET or
the signal cable from the HDMI output port of the
PC to the HDMI/DVI IN port on the SET.
► Connect the audio cable from the PC to the Audio
input on the SET. (Audio cables are not included
with the SET).
► If using a sound card, adjust PC sound as
required.
► If the graphic card on the PC does not output ana-
logue and digital RGB simultaneously, connect
only one of either RGB or HDMI/DVI IN to display
the PC output on the SET.
► If the graphic card on the PC does output ana-
logue and digital RGB simultaneously, set the SET
to either RGB or HDMI. (The other mode is set to
Plug and Play automatically by the SET.)
► DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
► If you use too long an RGB-PC cable that is too
long, there may be interference on the screen. We
recommend using under 5m of cable. This pro-
vides the best picture quality.
!