Filter
Top Products
18
Set ID
Power Indicator
DPM Select
Pixel Shift
Network Setup
You can assign a unique Set ID NO (name assignment) to each product when several
products are connected for display. Specify the number (1 to 99) using the ◄ ► button and
exit. Use the assigned Set ID to individually control each product using the Product Control
Program.
Use the function to the set power indicator on the front side of the product to On or Off.
A user can choose to turn the power saving mode on/off.
A user can choose to turn function.
Setup network information.
• Network Select : Sets up network connections.
- RS-232 : Enable communication via Serial.
- LAN : Enable communication via Ethernet.
• DHCP : Allocates and sets up IP automatically.
• Manual : Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS.
The setup process is complete when you select Execute, and "IP Setup
Completed" is displayed at the bottom of the screen. While "Wait for IP Setup" is
displayed, you cannot use the local keys and remote control. "Wait for IP Setup" is
displayed for up to 40seconds.
Selecting the UTILITY
User Menus
UTILITY
◄► Move
Set ID
Power Indicator
DPM Select
Pixel Shift
Network Setup
Factory Reset
1
On
Off
Off
>
>
Select
Back
MENU
▲
▼
NETWORK SETUP
◄► Move
LAN
>
>
Network Select
DHCP
Manual
Select
Back
MENU
▲
▼