Filter
Top Products
12 Plasma Monitor
Installation
NOTE: All cables shown are not included with the Monitor
- To avoid picture noise (interference), leave an adequate distance between the VCR and monitor.
- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time.
Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may
remain visible on the screen.
Connection Option
1. Connect the provided BNC-RCA adapter to the
monitor’s VIDEO INPUT.
2. Connect the audio and video cables from the
VCR's output jacks to the monitor input jacks,
as shown in the figure.
When connecting the monitor to VCR, match
the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
If you connect an S-VIDEO output from VCR to
the S-VIDEO input, the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
3. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
4. Select the input source with using the INPUT
SELECT button on the remote control. (If con-
nected to VIDEO INPUT, select Video input
source)
VCR Setup
VCR Setup
AC INPUT
RGB OUTPUTINPUT
S-VIDEO
OUT
IN
(R) AUDIO (L) VIDEO
R
L
R
L
AUDIO INPUT
VIDEO INPUT
AUDIO INPUT
S-VIDEO
YP
B
P
R
(MONO)
COMPONENT INPUT
( )
( )
( )
( )
EXTERNAL SPEAKER
R
L
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
Connection Option
1. Connect the provided BNC-RCA adapter to the monitor’s VIDEO
INPUT.
2. Connect the audio and video cables from the Cable Box's output
jacks to the TV input jacks, as shown in the figure.
When connecting the TV to a Cable Box, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
3. Select the input source with using the INPUT SELECT button on
the remote control. (If connected to VIDEO INPUT, select Video
input source)
4. Select your desired channel with the remote control for cable
box.
Cable
Cable
TV Setup
TV Setup
TV
VCR
RF Cable
(R) AUDIO (L) VIDEO
AC INPUT
R
L
R
L
AUDIO INPUT
VIDEO INPUT
AUDIO INPUT
S-VIDEO
YP
B
P
R
(MONO)
COMPONENT INPUT
( )
( )
( )
( )
EXTERNAL SPEAKER
R
L
VCR
Cable Box
External Equipment Connections
External Equipment Connections