LG Electronics MW-71PY10G Computer Monitor User Manual


 
8 Plasma Monitor
Introduction
Connection Options
Connection Options
REMOTE
CONTROL
RS-232C INPUT
(CONTROL/SERVICE)
AC INPUT
DVI INPUT
AUDIO INPUT
RGB INPUT
AUDIO
COMPONENT
COMPONENT
RL
VIDEO
INPUT 1
INPUT 2
VIDEO
INPUT 2
VIDEO
INPUT 1
VIDEO
MONO
AUDIO
RL
S-VIDEO
VIDEO3
VIDEO4
HDMI
R
( )
( )
( )
( )
L
EXTERNAL SPEAKER
Back Connection Panel
Back Connection Panel
EXTERNAL SPEAKER
(8 ohm output)
Connect to optional
external speaker(s).
* For further information,
refer to Speaker &
Speaker Standmanual.
Audio/Video Input
Connect audio/video output from
an external device to these jacks.
Component Input (1,2)
Connect a component video/audio
device to these jacks.
EURO SCART SOCKET
Connect the euro scart of
the VCR to these sockets.
Remote Control Port
Connect your wired
remote control here.
S-Video Input
Connect S-Video out from
an S-VIDEO device to the
S-VIDEO input.
Power Cord Socket
This monitor operates on an AC power. The voltage is
indicated on the Specifications page. Never attempt to
operate the monitor on DC power.
RS-232C INPUT
(CONTROL/SERVICE) PORT
Connect to the RS-232C port
on a PC.
HDMI
Connect a HDMI
signal to this jack.
DVI Input/Audio Input/RGB Input
Connect the monitor output connector
from a PC to the appropriate input port.