Filter
Top Products
Owner’s Manual 9
Introduction
- When using the remote control, aim it at the remote control sensor on the monitor.
- Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press
the key again as necessary.
Remote Control Key Functions
Remote Control Key Functions
Installing Batteries
• Open the battery compartment cover on the back side and install the batteries
matching correct polarity (+ with +, - with -).
• Install two 1.5V AA batteries. Don’t mix old or used batteries with new ones.
Replace cover.
LIGHT
INPUT
MODE
PIP
MUTE
SLEEP
VOL CH
WIN. SIZE
WIN. POSITION
SPLIT ZOOM
MENU
PIP INPUT ARC
EXIT
PLAY PAUSE STOP RECORD
VIDEO COM1 RGB
DVI
ENTER
HDMI
KEY LOCK INDEX
REW FF SKIP
POWER
DW
D
A
S
P
APC
COM2
LIGHT
Illuminates the remote control buttons.
INPUT
Selects: Video1-2-3-4, Component 1-2,
RGB-DTV (or RGB-PC),
DVI-DTV (or DVI-PC), HDMI input sources.
PIP
Selects the PIP mode.
NUMBER buttons
Dosen’t work for monitor mode.
APC
Adjusts the factory preset picture according
to the room.
MUTE
Switches the sound on or off.
VCR/DVD BUTTONS
Control some video cassette recorders or
DVD player ("RECORD" button is not avail-
able for DVD player).
SPLIT ZOOM
Enlarges the picture.
MODE
Selects the remote operating mode: MNT,
VCR, DVD, CABLE, HDSTB or AUDIO.
Select other operating modes, for the
remote to operate external devices.
POWER
Turns your monitor or any other pro-
grammed equipment on or off, depending
on mode.
DW
Selects the DW mode.
SLEEP
Sets the Sleep Timer.
XD
Switches the XD on or off.
(Refer to p. 19)
DASP
To select the sound appropriate to your
viewing program character:
SRS TSXT, Flat, Music, Cinema, Sports,
or User (Refer to p.21)
THUMBSTICK
(Up/Down/Left/Right/ENTER)
Allows you to navigate the on-screen
menus and adjust the system settings to
your preference.
CHANNEL UP/DOWN
Selects available channels found with Auto
program. Dosen’t work for monitor mode.
EXIT
Clears all on-screen displays and returns to
monitor viewing from any menu.
ARC
Changes the picture format. (Refer to p. 25)
VOLUME UP/DOWN
Increases/decreases the sound level.
WIN.POSITION
Moves the sub picture.
MENU
Brings up the main menu to the screen.
WIN. SIZE
Adjusts the sub picture size.
PIP INPUT
Selects the input source for
the sub picture.
VIDEO/COM1/COM2/RGB/DVI/HDMI
Selects: Video1-2-3-4, Component 1-2,
RGB-DTV (or RGB-PC), DVI-DTV (or DVI-
PC), HDMI input sources.
KEY LOCK
Switches the key lock on or off.
INDEX
Switches LED Display on or off.