LG Electronics RD-JT41 800X600 SVGA Projector User Manual


 
20
DLP Personal Projector
MAINTENANCE
Lamp Information
Use and Replacement of the Lamp
When the Lamp Indicator lights up red or a message appears suggesting the
time of lamp replacement, please install a new lamp or consult your dealer. An
old lamp could cause a malfunction in the projector and in rare instances may
even explode.
Lamp LED Indicators
Caution
The LAMP indicator will light up if the lamp becomes too hot. Turn off the
power and let the projector cool for 45 minutes. If the LAMP indicator is still
red when turning the power on, please contact your dealer.
Lamp Replacement
Please check with LG service center for the information of lamp replacement.
Lamp Life Indicators When the LED lights up red, it is warning you that
lamp uage has exceeded 1500 hours. Replace the
projection lamp with a new one immediately.
The Lamp is not
properly attached
LED lights up red.
Lamp temperature is
too high
When the projector’s internal temperature is too
high for the projector to operate safely, the LED
blinks orange and the lamp turns off automatically.
The LED keeps blinking while the unit is off.
If the LED light is off, the operation and temperature
of the projector’s lamp are normal.